Spectrophotometer

ODYSSEY water quality spectrophotometer is an innovative water analysis instrument for measurement of water, wastewater and boiler and cooling water. The new technology behind Odyssey focuses on:

• A water quality instrument with all best features of an expensive scanning spectrophotometer cum pH meter built into a sleek enclosure at an affordable cost.
• Touch screen computer interface, gives fast control over instrument operation and easily navigate to the test method.
• Advanced concentric polychromator optics has no moving parts to wear out or to be replaced and provides significantly reduced stray light.
• Highly versatile, flexible/ self adjusting sample compartment to accommodate verity of multiple round sample cells.
• Results modes transmittance, absorbance, concentration, pH, mV, and temperature, plus optional wavelength scan and time course graphs/ kinetics.
• Meets GLP guideline. Downland stored information into computer as a standard report format or printer through the RS-232 connection.

Tel: 040-3302526
Fax: 040-3325760
Email: orbitech@orbitindia.com

The Gas Field Thermometer has a sensing media (Gas), which is environmental friendly; it has many advantages for over conventional mercury field thermometer.

Some of the features are the better repeatability, low hysterias, better satiability, accuracy and linearity of the instrument. These are specifically designed for the sanitary application like food, pharma and dairy apart from the other process industries like petrochemicals, chemical, fertilizer, Cement and steel etc.

The construction of these thermometers is same as of mercury steel thermometer except the sensing media. These are normally available for 4 and 6 dial size with an accuracy of 1 per cent FS or better mounting can be provided with local direct mounting surface mounting or panel mounting with back or bottom entries. These can be supplied with rigid stem or capillary option. These are made of complete stainless steel including case and bezel, capillary or stem material.

These can be fitted with the option of electrical contact, glycerin filling and anit-vibration spring or adjustable angle. Fixed or adjustable connection is provided on the immersion probe to adjust the immersion length. This instrument comes with factory calibration certificate and also can be supplied with traceable certificate for ISO purpose.

Tel: 0091-22-56963030
Fax: 0091-22-26873613
Email: waaree@waaree.com

The noncontact temperature measurement systems are offered for industrial applications. The miniature size, low cost, accurate and easy-to-install temperature measurement system is an economical alternative to traditional methods.

The Series MIL is a two-piece infrared temperature measurement system with a miniature sensing head and separate electronics. The sensor is small enough installed just about anywhere, yet it performs as well as much larger system. The electronics feature emissivity, peak hold, valley hold and averaging function, all of which are adjustable on the 5-digit LCD user interface.

This series is designed for applications, with temperatures ranges from 40 to 1112 F (40 to 600 C). The sensor is housed in a rugged stainless steel enclosure to ensure long term performance even in harsh industrial environments. The Series MIL has an accuracy of 1 per cent of reading 1 F which ever is greater and a choice of 2:1 or 10:1 optics, and user selectable output signals.

Tel: 0091-22-56963030
Fax: 0091-22-26873613
Email: waaree@waaree.com

The Turbo mill is suitable for sifting and milling of dry granules. One can use mesh size from 4 to 25 as per user’s requirement for sifting and perforated sieve of 1 mm dia to 2.5 mm diameter holes.

Powder is fed to Turbo mill through infeed hopper of the Turbo mill. Now this powder after entering the Turbo mill is pushed forward by screw in the sieve chamber. There are blades which while rotating push the material against the sieve. Sieve material will fall through the 250 diameter opening. Over size material than passes through set of milling blades that cuts the oversize granules and make it as per the perforation size required. Using silicon rubber sleeve, this sieved material is transferred to Container of suitable size through a gasket of special design which ensures complete dust free system. Sieved chamber granules along with shifted granules come together in a common pipe of 250 diameter.

Entire assembly and sieves can be removed for cleaning very easily.

As an option frequency drive (ac drive) system can be provided whereby one can vary rpm depending upon the requirement. This facility is offered as an optional on request. Entire is mounted over the pipe structure of 75mm dia pipes of SS 304 with castor wheels at the bottom. There are two fixed castors and two swivelling castors made of UHMW, with SS 304 side bracket and ball bearings for extra heavy duty application. Turbomill is widely used to mill dry granules with minimum of dust generation in the production area.

Capacity: 300-400 kg/hour depending upon the physical properties of the product.

Tel: 91-260-422774
Fax: 91-260-432509
Email: saraleng@sify.com

MODEL Eco BOD replaces the need for titration of samples by winkler method and DO results are obtained directly with a BOD probe. BOD probe fits perfectly on a standard Wheaton BOD bottle to provide accurate BOD readings. Magnetic stirrer and stir bars supplied along with the meter provide accurate continuous sample stirring during the DO measuremeter. Measure sample BOD by measuring the initial DO of the sample and final DO (after 5 days incubation in a BOD incubator) and using the standard formulae for BOD calculations. Model Eco BOD is simple to operate and has only few keys for measuring and calibration. It has backlit display for operation under dark conditions. Eco BOD can measure DO both in mg/L and % air saturation modes.

Tel: 040-3302526
Fax: 040-3325760
Email: orbitech@hd1.vsnl.net.in

THE economical digital vacuum gauge reads in seven user selectable units. The Model VG12 is suitable for field or laboratory use. The Model delivers high precision at a low price and is ideal for many applications.

The Model VG12 can accurately read vacuum from 12,000 microns down to 0, and also has a wide operating temperature range of 35 to 125°F (2 to 52°C). The large LCD displays seven different international engineering units which are user selectable such as milliTorrs, PSI, milliBars, inches of Hg and Pascals. Each unit is equipped with auto shut-off and a bar graph which shows increasing and decreasing vacuum. The Model VG also features a cleaning port which provides quick cleaning and drying of the sensor and a convenient built-in hanger on the back of the unit.

Tel: 0091-22-26874778/ 56963030
Fax: 0091-22-26873613
Email: waaree@waaree.com

THE Glass tube/ acrylic body rotameries are offered for the measurement of fluid/ gas flow rate through pipe lines. The rotameter works on variable cross section of glass tube (metering tube). The glass tube rotameter has a unique design to withstand tough quality conditions. This metering tube is shielded from all sides with clear front and rear visibility.

Gland packing construction provides tension free tube installation and perfect stoppage of leaking. The tube and float are easily interchangeable. Various options for construction and material of construction of wetted parts for the wide range of applications. These are manufactured from 15 NB to 80 NB and flange between 2.5 LPH or 2000 LPH or water and 0.1 to 200 NM /hr. of Air. The rotameter has linear scale accuracy with 10:1 rangebility. It has face height 500 mm and two tone powder coating and low cost with fastest delivery.

Telfax: (0265) 636795
Email: flowtechad1@sancharnet.in